Dorset: Steel timing cover & angled cut timing gears.
Page orgaised with most common items tabled first followed by model specific items.
| DESCRIPTION | OEM-NUM | PB-REF | PRICE | | Cylinder Head 4-CYL Dorset - Bare | - | P8-1 | £900 |
| Cylinder head bolt set 4-CYL | - | P8-2 | £197 |
| Cylinder head bolt set 6-CYL | - | P8-3 | £285 |
| Cylinder head rocker cover breather valve | 866F 6769 AA | P8-4 | £52 |
| Cylinder head rocker cover screw | - | P8-5 | £2 |
| Cylinder Head with valves and springs for 6-CYL Dorset | - | P8-6 | £1,550 |
| Cylinder Head with valves and springs for 4-CYL Dorset | - | P8-7 | £1,350 |
| Cylinder Head for 6-CYL Dorset - Bare | - | P8-8 | £1,200 |
| Cylinder Head for 4-CYL Dorset - Bare | - | P8-9 | £1,150 |
| Cylinder Head with valves and springs for 6-CYL Dorset | - | P8-10 | £1,550 |
| Cylinder Head Dowel Pin kit for gasket alignment (2 per kit) | 826F 6A008 DAA | P7-87 | £26 |
| HEAD SET DORSET 6.CYL | 703F 6014 AA | P7-204 | £102 |
| HEAD SET 4.CYL DORSET | 703F 6014 AA 4.CYL | P7-205 | £83 |
| De-coke set 2712E 4-CYL | - | P8-11 | £74 |
| De-coke set 2715E 6-CYL | - | P8-12 | £99 |
| Exhaust valve (early single grove) 2712E* | - | P8-13 | £29 |
| Exhaust valve (late multi grove) | - | P8-14 | £29 |
| Exhaust Valve Spring, 70.8mm long | - | P8-15 | £15 |
| FULL GASKET DORSET 6CYL | 2000E 6008 | P7-202 | £136 |
| Gaskets, special, to use Dover manifolds on Dorset N/A engines (pair) | - | P8-16 | £35 |
| Leak preventer plates with gaskets to use Dover manifolds on Dorset N/A (pair) | - | P8-17 | £123 |
| Head gasket 4-CYL | - | P8-18 | £30 |
| Head gasket 6-CYL | - | P8-19 | £32 |
| Inlet valve (early single grove) | - | P8-20 | £29 |
| Inlet valve (late multi grove) | - | P8-21 | £38 |
| Inlet Valve Spring, 58mm long | - | P8-22 | £12 |
| Inlet/Exhaust valve cotter multi-groove, pair per valve | - | P8-23 | £12 |
| Inlet/Exhaust valve cotter single groove, per pair 510E 6518 Dorset | - | P8-24 | £13 |
| Inlet/Exhaust Valve guide VAG330 | - | P8-25 | £14 |
| Inlet/Exhaust Valve stem seals, per 4 | - | P8-26 | £13 |
| Manifold to head gaskets Dorset (Pair, Trim for 4-CYL) | - | P8-27 | £11 |
| Manifold to head stud (Stepped 46mm long) | - | P8-28 | £8 |
| Manifold, inlet, 2715 Dorset, rear entry, modified for 4-cyl | - | P8-29 | £295 |
| Manifold, inlet, 2715E 6-cyl Dorset, rear entry | - | P8-30 | £240 |
| Nuts, long exhaust manifold to head, set of 4 | - | P8-31 | £6 |
| Nuts, long exhaust manifold to head, set of 6 | - | P8-32 | £9 |
| Oil Filler cap | - | P8-33 | £17 |
| ROCKER COVER GASKET 4.CYL DORSET | 723F 6584 DAA | P7-211 | £42 |
| ROCKER COVER GASKET 6.CYL DORSET | 2703E 6584 | P7-209 | £44 |
|
| DESCRIPTION | OEM-NUM | PB-REF | PRICE | | Big end bearing set 4-CYL | - | P8-36 | £99 |
| Big end bearing set 6-CYL | - | P8-37 | £129 |
| Nuts, Conrod, pair | - | P8-38 | £36 |
| Bolts, Conrod, pair | - | P8-39 | £36 |
| Camshaft bearing set, 6-CYL (Discard 2 for 4-CYL) | - | P8-40 | £73 |
| Camshaft Centre Bolt (Short) | - | P8-41 | £54 |
| Camshaft Follower | - | P8-42 | £18 |
| Camshaft, 4-CYL with 8 followers | - | P8-43 | £352 |
| Camshaft, 6-CYL with 12 followers | - | P8-44 | £372 |
| Core plug set 4 off 41.7mm, 3 off 55.8mm, 1 off 59.8mm | - | P8-45 | £38 |
| Cylinder Block with bearings, crank and pistons Ford 4 cyl 2711 /Dorset | - | P8-46 | £2,698 |
| Crankshaft Bolt Lock Tabs (Set) | 508E6431A | P8-47 | £9 |
| Crankshaft Bolt, Flywheel to crankshaft (each) | - | P8-48 | £10 |
| Crankshaft Bolts Flywheel/Ring-Gear set of 6 | - | P8-49 | £57 |
| Crankshaft Center Bolt 793F 6A345 AA Dorset | - | P8-50 | £52 |
| Crankshaft Dover/Dorset Reground 4-CYL | - | P8-51 | £695 |
| Crankshaft Dover/Dorset Reground 6 CYL | - | P8-52 | £895 |
| Crankshaft Pulley, 2 groove (1 groove is spare if 1 belt is used ) Dorset) | 826F 6B319 BB19 | P8-53 | £141 |
| Crankshaft Seal Front | - | P8-54 | £27 |
| Crankshaft Seal Rear (Fibre Version) | - | P8-55 | £12 |
| Cylinder Block with bearings, crank and pistons Ford 6 cyl 2715 /Dorset | - | P8-56 | £3,271 |
| Crankshaft Seal Rear (Rubber Version) | - | P8-57 | £56 |
| Crankshaft Shaft Key | - | P8-58 | £39 |
| Crankshaft Thrust bearing set 2712E | - | P8-59 | £21 |
| Cylinder liner Non Turbo, for repair | - | P8-60 | £60 |
| Gasket, timing cover A740 Cork Dorset | - | P8-61 | £11 |
| Main bearing set 4-CYL | - | P8-62 | £90 |
| Main bearing set 6-CYL | - | P8-63 | £133 |
| Oil - Dipstick (413mm long), with sump fitting and tube | - | P8-64 | £58 |
| Oil - Spin on oil filter conversion, without oil feed, including filter 1019851+ Dorset | - | P8-65 | £48 |
| Oil filter riser "Telephone" — Dorset | - | P8-66 | £110 |
| Oil pick up pipe. May require local modification to suit pump or sump — Dorset | - | P8-67 | £83 |
| Overhaul gasket set 6-CYL | - | P8-68 | £179 |
| Overhaul gasket set 4-CYL | - | P8-69 | £144 |
| Pipe, drain, turbocharger mm1462027 SAB49047 Dorset | - | P8-70 | £80 |
| Pipe, feed, turbocharger mm1486950, SAB49048 Dorset | - | P8-71 | £92 |
| Piston pin & rings Dorset Non Turbo | - | P8-72 | £183 |
| Piston ring set per piston Dorset Non Turbo | - | P8-73 | £52 |
| Plate, blanking, Tachometer hole — Dorset | - | P8-74 | £9 |
| Push rod 510E 6488 Dorset | - | P8-75 | £28 |
| Ring gear, flywheel, 128 Teeth | - | P8-76 | £132 |
| Sump gasket set 4-CYL | - | P8-77 | £37 |
| Sump gasket set 6-CYL | - | P8-78 | £41 |
| Sump pan Dover/Dorset, 4-CYL | - | P8-79 | £455 |
| Sump pan, 6-CYL Dorset/Dover Short (890mm for engines with centre oil pump) | - | P8-80 | £707 |
| Timing cover, pressed steel, Dorset, 6059086, Reconditioned | - | P8-81 | £118 |
| Water circulation pump to block gasket A734 Dorset | - | P8-82 | £8 |
| Water Pump pulley, bolt-on, 1-groove | - | P8-83 | £77 |
| Water Pump pulley, bolt-on, 2-groove | - | P8-84 | £185 |
| Water Pump Helical drive gear for raw water pump (Jabsco - angle cut for 7/8" bore 1:5 taper) Dorset | - | P8-85 | £81 |
| Water Pump Jabsco to Timing housing Gasket | - | P8-86 | £11 |
| Water thermostat housing to head gasket | - | P8-87 | £9 |
|
| DESCRIPTION | OEM-NUM | PB-REF | PRICE | | Fuel filter adapter, M14 to 8mm pipe,1-14211 | - | P8-88 | £6 |
| Fuel filter assembly, twin element, Dorset, 1/2IN UNF | - | P8-89 | £95 |
| Fuel filter to injection pump pipe 4-CYL, ½" UNF nuts, olives & 18" hose, 1 x 1-57922 2 x 31D69 2 x 080280 | - | P8-90 | £57 |
| Fuel filter to injection pump pipe, 6-CYL ½" UNF nuts, olives & 12" hose, 1 x 1-57920 2 x 31D69 2 x 080280 | - | P8-91 | £54 |
| Fuel Lift Pump to Filter 1 x 1-57922 18" 1 x 080280 olive 2 x 31D69 nuts Dorset | - | P8-92 | £36 |
| Fuel injection pipes clamp (Pair) | - | P8-93 | £15 |
| Fuel injection pump to timing case O Ring | - | P8-94 | £9 |
| Fuel injector nut seal | - | P8-95 | £2 |
| Fuel injector spill pipe, 6-CYL (cut down for 4cyl) 703F 9K022BA Dorset | - | P8-96 | £63 |
| Fuel injector to head seal 6114632 | - | P8-97 | £14 |
| Fuel leak off copper washers (pack of 12) | - | P8-98 | £6 |
| Fuel Reservoir, 377215, for Cold Start Thermostart | - | P8-99 | £37 |
| Fuel spill banjo bolt | - | P8-100 | £13 |
| Fuel spill banjo fitting | - | P8-101 | £19 |
| Injection pipes, Minimec set 4-CYL | - | P8-102 | £127 |
| Injection pipes, Minimec set 6-CYL | - | P8-103 | £179 |
| Nuts and Olives, 1/2" UNF to 5/16" pipe 2 off) 080280 + 31D69 | - | P8-104 | £6 |
| Injection pumps, injectors, turbochargers, starters and alternators repaired, exchanged or sold outright against part numbers stamped on old units. |
| All prices are given for standard sized components. Under- and over-sized components are available, though prices may vary. |
| Take care with main bearing sizes as some blocks are line-bored over-size. |
V.A.T. extra on U.K. sales, except Channel Isles.
Packing & Carriage is extra, optimum time route & cost tailored to the clients needs.
Quantity terms available on request.