Price Book - Page 55
1.0 INCH AND 25.0mm DIAMETER STERN GEAR
Page Updated: 26-Jul-22
Need help? Phone our experts on 01273 410025 or E-mail data@lancingmarine.com for advice - Boatbuilder Prices
Same price for 1.0IN & 25mm diameter shaft. Please specify shaft diameter on order.
STERN TUBES P-BRACKETS
DESCRIPTION | OEM-NUM | PRICE | Sterntube Aft Bearing Assembly, with Cutlass: Threaded, scoop-type Bronze, Bolt-in | | | | P55-1 | £260 |
Sterntube Aft Bearing Assembly, with Cutlass: Steel, Weld/Cement-in | | | | P55-2 | £68 |
Press-on keel-post mounting flange for rear of Brass/GRP Sterntube | | | | P55-3 | £51 |
Sterntubing: H.G. Steel, per 30cm (1" or 25mm) | | | | P55-4 | £17 |
Sterntubing: G.R.P, to Glass-in or Cement-in, (0.6m or 1.2m only), per 30cm | | | | P55-5 | £32 |
Sterntubing: H.G. Brass, per 30cm | | | | P55-6 | £62 |
Clamp-on bulkhead mounting flange for front of Brass/GRP Sterntube | | | | P55-7 | £37 |
Thread one end of brass tube for flange or bearing | | | | P55-8 | £59 |
Screw-on bulkhead mounting flange for front of Brass Sterntube | | | | P55-9 | £79 |
P-Bracket Bronze, Glass-in, with Cutlass | | | | P55-10 | £297 |
Mild steel P-bracket boss & phenolic bearing for welding | | | | P55-11 | £99 |
Intermediate Ball Race Shaft Bearing | | | | P55-12 | £84 |
|
CUTLESS BEARINGS
DESCRIPTION | ID | OD | LENGTH | OEM-NUM | PRICE | Phenolic casing, Imperial | 1″ | 1-1/2″ | 4″ | AINM100 | £25 |
Brass casing, Imperial | 1″ | 1-1/2″ | 4″ | AIB100 | £30 |
Brass casing, small outside diameter, Imperial | 1″ | 1-1/4″ | 4″ | AIB100A | £41 |
Phenolic casing, Metric | 25 | 40 | 100 | AMB025 | £31 |
Brass casing, Metric | 25 | 40 | 100 | AMNM025 | £27 |
Bass casing, small outside diameter, Metric | 25 | 1-1/4″ | 100 | AMIB025A | £41 |
Other bearings including for metric shafts in imperial casings and Imperial shafts in metric casings available for special order. |
FLEXIBLE SEAL ASSEMBLIES - 1 INCH & 25.0mm dia SHAFT
DESCRIPTION | OEM-NUM | PRICE | *Bronze Rubber-necked Gland flex seal assy | | | | P55-19 | £197 |
*Solid, bolt-in, screw-on bearing and gland | | | | P55-20 | £133 |
Nylon Rubber-necked Gland flex seal assy | | | | P55-21 | £154 |
*Phenolic rubber-necked gland “Canal use” with greaser (1" only) | | | | P55-22 | £72 |
Phenolic rubber-necked gland “River use” with water feed (1" only) | | | | P55-23 | £70 |
Remote Greaser Kit for items marked* | | | | P55-24 | £69 |
Deep Sea Seal Set No 2 | | | | IR-33146 | £238 |
|
PROPELLER SHAFT & SUNDRIES
DESCRIPTION | OEM-NUM | PRICE | Propeller Shaft Tapered/Plain, F51 type Stainless Steel with Keys, Washer and Nut, 0.9m Long | | | | P55-26 | £239 |
Propeller Shaft - Shafting, per 30cm extra (up to 3m total. Longer P.O.A.) | | | | P55-27 | £31 |
Propeller Shaft - Extra for Forward End Taper and Nut | | | | P55-28 | £99 |
Spare key, brass size 1/4 IN or 6.0mm | | | | P55-29 | £10 |
Spare shaft nut 5/8 IN dia U.N.C thread, bronze, hexagon | | | | P55-30 | £20 |
Propeller Shaft Clamp-on anodes, H.D. Zinc | | | | P55-31 | £25 |
Propeller Shaft Clamp-on anodes, H.D. Aluminium | | | | P55-32 | £8 |
|
ROPE CUTTERS
DESCRIPTION | OEM-NUM | PRICE | “Stripper” Propeller Shaft Rope Cutter (3 Blades Dia) | | | | P55-33 | £455 |
R&D rope cutter (0.75 to 1.00") or metric | | | | 400-001 | £202 |
R&D rope cutter (0.75 to 1.25") or metric | | | | 400-002 | £216 |
R&D Rope Cutter brochure |

Rubber necked gland

Stern tube and cutlass bearing

Deep sea seal
V.A.T. extra on U.K. sales, except Channel Isles.
Packing & Carriage is extra, optimum time route & cost tailored to the clients needs.
Quantity terms available on request.